多喷管火箭动力系统尾焰辐射特性可视化研究

为研究高空多喷管火箭动力系统尾焰辐射特性的可视化计算,采用耦合了Realizable k-ε湍流模型的三维N-S方程描述尾焰流动过程,化学反应速率采用湍流脉动机制和Arrhenius机制控制,采用PISO算法对多喷管动力系统尾焰流动过程进行求解,得到了尾焰流场的各项参数分布.在此基础上,运用气体辐射传输方程和SLG模型对不同方向观测面上接收到的尾焰辐射照度进行计算,得到尾焰在不同方向上的辐射特性分布,进而实现尾焰辐射特性的可视化计算.计算结果表明:高空助推器尾焰的辐射特性要明显强于芯级,其中喷管出口处尾焰的辐射特性最强,最容易被发现和识别;尾焰辐射特性的可视化计算可以有效捕捉到尾焰流场的结构,从而为尾焰的红外追踪与预警研究奠定基础.     

红外增强器辐射特性的测试和实验研究

本文对某靶机拖靶的红外增强器的红外辐射特征进行了实验研究,将红外增强器作为点源目标,对几种不同结构形式,在不同工作状态下,进行了地面现场实验测试。文中简要介绍了所使用的仪器和组合的红外测试系统,着重论述了红外增强器的辐射光谱特征、辐射能随时间和空间的分布情况、在多种工作状态下的表观有效红外辐射强度等红外辐射特征的实验测试方法,并对实验结果进行了分析。 实验表明:所测数据具有较好的重复性,相关参数具有明显的紧密相关性,其结果是可信的,为研制新型红外辐射源,提供了一种可供借鉴的探测系统和探测技术。     

一种基于自适应滤波器的潜艇辐射噪声仿真方法

文章提出了一种基于自适应滤波器的潜艇辐射噪声仿真方法。在对潜艇辐射噪声连续谱、线谱和调制谱的数学模型进行研究的基础上,利用Ecs型功率谱模型,基于自适应滤波器,通过傅里叶反变换对潜艇辐射噪声连续谱进行了仿真,分别叠加了线谱信号和调制谱信号之后,得到潜艇辐射噪声的仿真结果。通过对仿真结果的分析和利用仿真结果与实装进行对接测试,表明仿真的辐射噪声逼真度较高。     

航空发动机排气喷管红外辐射特征数值研究

红外隐身技术对提高未来战机战场生存力具有重要意义,发动机排气系统是飞机后半球的主要红外辐射源。为了研究涡扇发动机排气喷管的红外辐射特性,采用与成熟商用CFD软件相结合的策略,基于离散传递方法,自主开发航空发动机排气系统红外辐射特征数值计算软件。提出一种射线行程追踪方法,用来提高软件计算效率和模拟精度;最后用该软件对某型涡扇发动机排气系统收缩喷管及两种采用不同红外抑制措施的喷管进行数值模拟研究。结果表明：相对于传统的收缩喷管,二元喷管能够在绝大部分探测方向上有效降低喷管的红外辐射,引射喷管可在大角度探测方向上起到显著的红外隐身效果。     

某小型无人机中长波辐射特性测量及辐射强度反演

随着“自杀式”无人机集群的饱和式攻击在战场上发挥巨大威力,如何有效拦截是各国近年来研究的重要方向,而红外探测是最热门也是最高效的探测拦截手段之一。为此,开展某典型无人机目标中长波红外探测试验,获取典型某无人机目标辐射特性数据,完成中长波红外辐射强度反演。同时,考虑环境变化对红外探测的影响,为使用红外探测手段完成无人机目标拦截提供实测效果演示。本文研究结果可作为论证中长波对无人机目标探测差异的依据,以支撑探测体制的选择。     

Heliotropic dust rings for Earth climate engineering

This paper examines the concept of a Sun-pointing elliptical Earth ring comprised of dust grains to offset global warming. A new family of non-Keplerian periodic orbits, under the effects of solar radiation pressure and the Earth’s J₂ oblateness perturbation, is used to increase the lifetime of the passive cloud of particles and, thus, increase the efficiency of this geoengineering strategy. An analytical model is used to predict the orbit evolution of the dust ring due to solar-radiation pressure and the J₂ effect. The attenuation of the solar radiation can then be calculated from the ring model. In comparison to circular orbits, eccentric orbits yield a more stable environment for small grain sizes and therefore achieve higher efficiencies when the orbit decay of the material is considered. Moreover, the novel orbital dynamics experienced by high area-to-mass ratio objects, influenced by solar radiation pressure and the J₂ effect, ensure the ring will maintain a permanent heliotropic shape, with dust spending the largest portion of time on the Sun facing side of the orbit. It is envisaged that small dust grains can be released from a circular generator orbit with an initial impulse to enter an eccentric orbit with Sun-facing apogee. Finally, a lowest estimate of 1 × 10¹² kg of material is computed as the total mass required to offset the effects of global warming.     

Preparation of the Biochip experiment on the EXPOSE-R2 mission outside the International Space Station

Biochips might be suited for planetary exploration. Indeed, they present great potential for the search for biomarkers – molecules that are the sign of past or present life in space – thanks to their size (miniaturized devices) and sensitivity. Their detection principle is based on the recognition of a target molecule by affinity receptors fixed on a solid surface. Consequently, one of the main concerns when developing such a system is the behavior of the biological receptors in a space environment. In this paper, we describe the preparation of an experiment planned to be part of the EXPOSE-R2 mission, which will be conducted on the EXPOSE-R facility, outside the International Space Station (ISS), in order to study the resistance of biochip models to space constraints (especially cosmic radiation and thermal cycling). This experiment overcomes the limits of ground tests which do not reproduce exactly the space parameters. Indeed, contrary to ground experiments where constraints are applied individually and in a limited time, the biochip models on the ISS will be exposed to cumulated constraints during several months. Finally, this ISS experiment is a necessary step towards planetary exploration as it will help assessing whether a biochip can be used for future exploration missions.     

PHITS simulations of the Protective curtain experiment onboard the Service module of ISS: Comparison with absorbed doses measured with TLDs

“Protective curtain” was the physical experiment onboard the International Space Station (ISS) aimed on radiation measurement of the dose – reducing effect of the additional shielding made of hygienic water-soaked wipes and towels placed on the wall in the crew cabin of the Service module Zvezda. The measurements were performed with 12 detector packages composed of thermoluminescent detectors (TLDs) and plastic nuclear track detectors (PNTDs) placed at the Protective curtain, so that they created pairs of shielded and unshielded detectors.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

空间卫星红外辐射灵敏度分析

考虑卫星本体表面包覆绝热材料的实际物理状态,根据数值传热学和有限容积法建立了目标表面温度场和红外辐射计算模型.建立卫星结构模型,基于热控涂层性能退化,提出红外辐射灵敏度概念,并建立了卫星红外辐射灵敏度计算模型.对在轨飞行卫星的瞬态温度场进行数值模拟,与遥测数据对比分析.最后,分析了空间卫星的红外辐射和红外辐射灵敏度.结...